locally chaos redis

Preview

During Public Preview you can use the Team plan for free, and get an early-adopter discount at GA. Sign in

locally chaos redis

This page is part of the CLI Reference and is generated from the CLI's own help output, so it matches what locally chaos redis --help prints.

For more information see Chaos Engineering.

locally chaos redis

Simulate Redis (data plane) failure modes.

Simulate Redis (data plane) failure modes.

A fault command sets the fault's rate. With a scope flag (--location / --name)
it adds or edits a rule instead.

Examples:
locally chaos redis <fault> --percentage N
  locally chaos redis <fault> reset
  locally chaos redis show
  locally chaos redis reset

Usage

locally chaos redis [flags]
  locally chaos redis [command]

Flags

-h, --help[=true|false]   help for redis

Subcommands

locally chaos redis 403

Answer requests with 403, as when a role assignment has not replicated yet.

Answer requests with 403, as when a role assignment has not replicated yet. On
the control plane the error code is AuthorizationFailed; on a database the
engine's own equivalent error is sent instead.

Without scope flags this sets the fault's rate on Redis (data plane). With
--location / --name it adds or edits one rule, leaving the rate and other rules
alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

Examples:
locally chaos redis 403 --percentage 25
  locally chaos redis 403 --percentage 100 --location london
  locally chaos redis 403 reset --location london
  locally chaos redis 403 --percentage 100 --name acct1

Usage

locally chaos redis 403 [flags]
  locally chaos redis 403 [command]

Flags

-h, --help[=true|false]     help for 403
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos redis 403 reset

Remove one 403 rule, or put the whole fault back to zero.

Reset the 403 fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos redis 403 reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos redis 429

Answer requests with 429 Too Many Requests and a retry hint.

Answer requests with 429 Too Many Requests and a retry hint. On a database the
engine's own throttling error is sent instead.

Without scope flags this sets the fault's rate on Redis (data plane). With
--location / --name it adds or edits one rule, leaving the rate and other rules
alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

--retry-after sets the Retry-After header the fault answers with, such as 5s.
Without one the service's usual hint is sent.

A value flag left out keeps what the row already has; a new rule starts with
none. 'reset' clears a row.

Examples:
locally chaos redis 429 --percentage 25
  locally chaos redis 429 --percentage 25 --retry-after 5s
  locally chaos redis 429 --percentage 100 --location london
  locally chaos redis 429 reset --location london
  locally chaos redis 429 --percentage 100 --name acct1

Usage

locally chaos redis 429 [flags]
  locally chaos redis 429 [command]

Flags

-h, --help[=true|false]     help for 429
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --retry-after string    Retry-After this fault answers with, e.g. 5s or 500ms (the service's usual hint when omitted)
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos redis 429 reset

Remove one 429 rule, or put the whole fault back to zero.

Reset the 429 fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos redis 429 reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos redis 500

Answer requests with 500 Internal Server Error.

Answer requests with 500 Internal Server Error. On a database the engine's own
equivalent error is sent instead.

Without scope flags this sets the fault's rate on Redis (data plane). With
--location / --name it adds or edits one rule, leaving the rate and other rules
alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

Examples:
locally chaos redis 500 --percentage 25
  locally chaos redis 500 --percentage 100 --location london
  locally chaos redis 500 reset --location london
  locally chaos redis 500 --percentage 100 --name acct1

Usage

locally chaos redis 500 [flags]
  locally chaos redis 500 [command]

Flags

-h, --help[=true|false]     help for 500
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos redis 500 reset

Remove one 500 rule, or put the whole fault back to zero.

Reset the 500 fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos redis 500 reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos redis busy

Answer Redis commands with -BUSY, as a server running a long script does.

Answer Redis commands with -BUSY, as a server running a long script does.

Without scope flags this sets the fault's rate on Redis (data plane). With
--location / --name it adds or edits one rule, leaving the rate and other rules
alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

Examples:
locally chaos redis busy --percentage 25
  locally chaos redis busy --percentage 100 --location london
  locally chaos redis busy reset --location london
  locally chaos redis busy --percentage 100 --name acct1

Usage

locally chaos redis busy [flags]
  locally chaos redis busy [command]

Flags

-h, --help[=true|false]     help for busy
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos redis busy reset

Remove one busy rule, or put the whole fault back to zero.

Reset the busy fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos redis busy reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos redis disconnect

Close live connections cleanly, in the protocol's own terms, so the client has to reconnect.

Close live connections cleanly, in the protocol's own terms, so the client has
to reconnect. Every interval each open connection is rolled for. Compare
drop-connection, which cuts them with nothing said.

Without scope flags this sets the fault's rate on Redis (data plane). With
--location / --name it adds or edits one rule, leaving the rate and other rules
alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

--interval is how often the fault starts, such as 10m. It is required whenever
the fault fires: nothing else sets it off.

A value flag left out keeps what the row already has; a new rule starts with
none. 'reset' clears a row.

Examples:
locally chaos redis disconnect --percentage 25 --interval 10m
  locally chaos redis disconnect --percentage 100 --interval 10m --location london
  locally chaos redis disconnect reset --location london
  locally chaos redis disconnect --percentage 100 --interval 10m --name acct1

Usage

locally chaos redis disconnect [flags]
  locally chaos redis disconnect [command]

Flags

-h, --help[=true|false]     help for disconnect
      --interval string       How often this fault rolls for each resource, e.g. 10m; the first roll lands at a random point within the first interval (required when it fires)
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos redis disconnect reset

Remove one disconnect rule, or put the whole fault back to zero.

Reset the disconnect fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos redis disconnect reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos redis drop-connection

Close the connection without answering.

Close the connection without answering. The client sees the connection reset,
with no status code or error body. With --interval it also cuts live
connections: every interval each is rolled for, and on a hit it is reset with
nothing said - no close frame or goodbye. For a clean close, use disconnect.

Without scope flags this sets the fault's rate on Redis (data plane). With
--location / --name it adds or edits one rule, leaving the rate and other rules
alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

--interval adds periodic action on live connections, such as every 30s, to the
fault's per-request behaviour, which carries on as before. For periodic cuts
with no per-request drops, arm disconnect instead.

A value flag left out keeps what the row already has; a new rule starts with
none. 'reset' clears a row.

Examples:
locally chaos redis drop-connection --percentage 25
  locally chaos redis drop-connection --percentage 25 --interval 30s
  locally chaos redis drop-connection --percentage 100 --location london
  locally chaos redis drop-connection reset --location london
  locally chaos redis drop-connection --percentage 100 --name acct1

Usage

locally chaos redis drop-connection [flags]
  locally chaos redis drop-connection [command]

Flags

-h, --help[=true|false]     help for drop-connection
      --interval string       Also act on live connections this often, e.g. 30s or 10m (adds to the per-request fault; use disconnect for periodic cuts only)
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos redis drop-connection reset

Remove one drop-connection rule, or put the whole fault back to zero.

Reset the drop-connection fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos redis drop-connection reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos redis failover

Fail the primary over on a schedule.

Fail the primary over on a schedule. On a hit the primary is unavailable for the
rolled duration and any secondary serves reads only, then the primary returns.

Without scope flags this sets the fault's rate on Redis (data plane). With
--location / --name it adds or edits one rule, leaving the rate and other rules
alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

--seconds and --millis set the duration. A bare number is in the flag's unit;
one with its own suffix, such as 250ms or 1.5s, means what it says. One value N
picks 0 to N each time; MIN-MAX, such as 30-120, picks within that range. A
duration is required whenever the fault fires.

--interval is how often the fault starts, such as 10m. It is required whenever
the fault fires: nothing else sets it off.

A value flag left out keeps what the row already has; a new rule starts with
none. 'reset' clears a row.

Examples:
locally chaos redis failover --percentage 25 --seconds 30-120 --interval 10m
  locally chaos redis failover --percentage 100 --seconds 30-120 --interval 10m --location london
  locally chaos redis failover reset --location london
  locally chaos redis failover --percentage 100 --seconds 30-120 --interval 10m --name acct1

Usage

locally chaos redis failover [flags]
  locally chaos redis failover [command]

Flags

-h, --help[=true|false]     help for failover
      --interval string       How often this fault rolls for each resource, e.g. 10m; the first roll lands at a random point within the first interval (required when it fires)
      --location string       Scope this rule to one location, e.g. london
      --millis string         Duration in milliseconds, e.g. 250; N for 0 to N, or MIN-MAX for a range
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --seconds string        Duration in seconds, e.g. 30 or 1.5; N for 0 to N, or MIN-MAX for a range
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos redis failover reset

Remove one failover rule, or put the whole fault back to zero.

Reset the failover fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos redis failover reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos redis latency

Hold requests for a random delay before they are handled.

Hold requests for a random delay before they are handled. The response is
unchanged, just late. With --interval it also stalls live connections: every
interval each is rolled for, and on a hit nothing crosses it in either direction
until the rolled delay has passed. Nothing is dropped; it all arrives late.

Without scope flags this sets the fault's rate on Redis (data plane). With
--location / --name it adds or edits one rule, leaving the rate and other rules
alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

--seconds and --millis set the duration. A bare number is in the flag's unit;
one with its own suffix, such as 250ms or 1.5s, means what it says. The value is
a maximum: each firing picks 0 to N. A duration is required whenever the fault
fires.

--interval adds periodic action on live connections, such as every 30s, to the
fault's per-request behaviour, which carries on as before. For periodic cuts
with no per-request drops, arm disconnect instead.

A value flag left out keeps what the row already has; a new rule starts with
none. 'reset' clears a row.

Examples:
locally chaos redis latency --percentage 25 --seconds 30
  locally chaos redis latency --percentage 25 --seconds 30 --interval 30s
  locally chaos redis latency --percentage 100 --seconds 30 --location london
  locally chaos redis latency reset --location london
  locally chaos redis latency --percentage 100 --seconds 30 --name acct1

Usage

locally chaos redis latency [flags]
  locally chaos redis latency [command]

Flags

-h, --help[=true|false]     help for latency
      --interval string       Also act on live connections this often, e.g. 30s or 10m (adds to the per-request fault; use disconnect for periodic cuts only)
      --location string       Scope this rule to one location, e.g. london
      --millis string         Duration in milliseconds, e.g. 250; the maximum: each firing picks 0 to N
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --seconds string        Duration in seconds, e.g. 30 or 1.5; the maximum: each firing picks 0 to N
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos redis latency reset

Remove one latency rule, or put the whole fault back to zero.

Reset the latency fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos redis latency reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos redis loading

Answer Redis commands with -LOADING, as a server still loading its dataset does.

Answer Redis commands with -LOADING, as a server still loading its dataset does.

Without scope flags this sets the fault's rate on Redis (data plane). With
--location / --name it adds or edits one rule, leaving the rate and other rules
alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

Examples:
locally chaos redis loading --percentage 25
  locally chaos redis loading --percentage 100 --location london
  locally chaos redis loading reset --location london
  locally chaos redis loading --percentage 100 --name acct1

Usage

locally chaos redis loading [flags]
  locally chaos redis loading [command]

Flags

-h, --help[=true|false]     help for loading
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos redis loading reset

Remove one loading rule, or put the whole fault back to zero.

Reset the loading fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos redis loading reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos redis moved

Answer Redis commands with -MOVED, as a cluster does when the key's slot now lives on another node.

Answer Redis commands with -MOVED, as a cluster does when the key's slot now
lives on another node.

Without scope flags this sets the fault's rate on Redis (data plane). With
--location / --name it adds or edits one rule, leaving the rate and other rules
alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

Examples:
locally chaos redis moved --percentage 25
  locally chaos redis moved --percentage 100 --location london
  locally chaos redis moved reset --location london
  locally chaos redis moved --percentage 100 --name acct1

Usage

locally chaos redis moved [flags]
  locally chaos redis moved [command]

Flags

-h, --help[=true|false]     help for moved
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos redis moved reset

Remove one moved rule, or put the whole fault back to zero.

Reset the moved fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos redis moved reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos redis outage

Fail requests for as long as the rule is armed, like a region or service that is down.

Fail requests for as long as the rule is armed, like a region or service that is
down. Each request rolls against the percentage, so at 100 every request fails
until the fault is turned off. Each service answers in its own terms, usually
503 Service Unavailable, and a protocol with live connections also closes the
ones open when the outage starts. For downtime that ends by itself, see
incident.

Without scope flags this sets the fault's rate on Redis (data plane). With
--location / --name it adds or edits one rule, leaving the rate and other rules
alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

--retry-after sets the Retry-After header the fault answers with, such as 5s.
Without one the service's usual hint is sent.

A value flag left out keeps what the row already has; a new rule starts with
none. 'reset' clears a row.

Examples:
locally chaos redis outage --percentage 25
  locally chaos redis outage --percentage 25 --retry-after 5s
  locally chaos redis outage --percentage 100 --location london
  locally chaos redis outage reset --location london
  locally chaos redis outage --percentage 100 --name acct1

Usage

locally chaos redis outage [flags]
  locally chaos redis outage [command]

Flags

-h, --help[=true|false]     help for outage
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --retry-after string    Retry-After this fault answers with, e.g. 5s or 500ms (the service's usual hint when omitted)
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos redis outage reset

Remove one outage rule, or put the whole fault back to zero.

Reset the outage fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos redis outage reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos redis reset

Zero every Redis (data plane) fault and drop every rule.

Zero every Redis (data plane) fault and drop every rule.

Examples:
locally chaos redis reset

Usage

locally chaos redis reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos redis restart

Restart the workload on a schedule.

Restart the workload on a schedule. Every interval each target is rolled for; on
a hit it restarts the way its own restart action does, dropping its connections.

Without scope flags this sets the fault's rate on Redis (data plane). With
--location / --name it adds or edits one rule, leaving the rate and other rules
alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

--interval is how often the fault starts, such as 10m. It is required whenever
the fault fires: nothing else sets it off.

A value flag left out keeps what the row already has; a new rule starts with
none. 'reset' clears a row.

Examples:
locally chaos redis restart --percentage 25 --interval 10m
  locally chaos redis restart --percentage 100 --interval 10m --location london
  locally chaos redis restart reset --location london
  locally chaos redis restart --percentage 100 --interval 10m --name acct1

Usage

locally chaos redis restart [flags]
  locally chaos redis restart [command]

Flags

-h, --help[=true|false]     help for restart
      --interval string       How often this fault rolls for each resource, e.g. 10m; the first roll lands at a random point within the first interval (required when it fires)
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos redis restart reset

Remove one restart rule, or put the whole fault back to zero.

Reset the restart fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos redis restart reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos redis show

Print the current Redis (data plane) chaos configuration.

Print the current Redis (data plane) chaos configuration.

Examples:
locally chaos redis show

Usage

locally chaos redis show [flags]

Flags

-h, --help[=true|false]     help for show
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos redis too-many-connections

Refuse new connections with the engine's own connection-limit error.

Refuse new connections with the engine's own connection-limit error.

Without scope flags this sets the fault's rate on Redis (data plane). With
--location / --name it adds or edits one rule, leaving the rate and other rules
alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

--retry-after sets the Retry-After header the fault answers with, such as 5s.
Without one the service's usual hint is sent.

A value flag left out keeps what the row already has; a new rule starts with
none. 'reset' clears a row.

Examples:
locally chaos redis too-many-connections --percentage 25
  locally chaos redis too-many-connections --percentage 25 --retry-after 5s
  locally chaos redis too-many-connections --percentage 100 --location london
  locally chaos redis too-many-connections reset --location london
  locally chaos redis too-many-connections --percentage 100 --name acct1

Usage

locally chaos redis too-many-connections [flags]
  locally chaos redis too-many-connections [command]

Flags

-h, --help[=true|false]     help for too-many-connections
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --retry-after string    Retry-After this fault answers with, e.g. 5s or 500ms (the service's usual hint when omitted)
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos redis too-many-connections reset

Remove one too-many-connections rule, or put the whole fault back to zero.

Reset the too-many-connections fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos redis too-many-connections reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)
Preview

During Public Preview you can use the Team plan for free, and get an early-adopter discount at GA. Sign in

A local cloud for you and your AI agents.

Your Azure infrastructure, running on your machine. Deploy in seconds, break things freely, and ship to Azure when you're ready.