During Public Preview you can use the Team plan for free, and get an early-adopter discount at GA. Sign in
locally chaos identity
This page is part of the CLI Reference and is generated from the CLI's own help output, so it matches what locally chaos identity --help prints.
For more information see Chaos Engineering.
locally chaos identity
Simulate Entra ID tokens (identity) failure modes.
Simulate Entra ID tokens (identity) failure modes. A fault command sets the fault's rate. With a scope flag (--name) it adds or edits a rule instead. Identity faults also affect locally commands that sign in, such as the deploy and runbook tools of locally mcp, and locally servicebus. Locally's own background work (autoscale, diagnostic settings) is not affected. Examples: locally chaos identity <fault> --percentage N locally chaos identity <fault> reset locally chaos identity show locally chaos identity reset
Usage
locally chaos identity [flags] locally chaos identity [command]
Flags
-h, --help[=true|false] help for identity
Subcommands
- locally chaos identity 403 - Answer requests with 403, as when a role assignment has not replicated yet.
- locally chaos identity 429 - Answer requests with 429 Too Many Requests and a retry hint.
- locally chaos identity 500 - Answer requests with 500 Internal Server Error.
- locally chaos identity clock-skew - Issue tokens whose nbf (not before) is 5 minutes in the future, as an authority with a skewed clock does.
- locally chaos identity disable - Turn chaos OFF for the directory and identity.
- locally chaos identity discovery-unavailable - Answer the OpenID Connect metadata endpoint (/.well-known/openid-configuration) with 503.
- locally chaos identity drop-connection - Close the connection without answering.
- locally chaos identity enable - Turn chaos ON for the directory and identity.
- locally chaos identity incident - Take each resource down for a while, then bring it back.
- locally chaos identity invalid-grant - Refuse refresh token redemptions with invalid_grant (AADSTS700082), as if the refresh token had expired.
- locally chaos identity jwks-unavailable - Answer the signing keys endpoint (/discovery/v2.0/keys) with 503, so token validation cannot fetch the keys.
- locally chaos identity latency - Hold requests for a random delay before they are handled.
- locally chaos identity msi-unavailable - Fail managed identity token requests with 500 or 503 from the MSI endpoint the app calls.
- locally chaos identity outage - Fail requests for as long as the rule is armed, like a region or service that is down.
- locally chaos identity reset - Zero every Entra ID tokens (identity) fault and drop every rule.
- locally chaos identity show - Print the current Entra ID tokens (identity) chaos configuration.
- locally chaos identity slow-down - Answer device code token polls with slow_down, so the client has to poll less often.
locally chaos identity 403
Answer requests with 403, as when a role assignment has not replicated yet.
Answer requests with 403, as when a role assignment has not replicated yet. On the control plane the error code is AuthorizationFailed; on a database the engine's own equivalent error is sent instead. Without scope flags this sets the fault's rate on Entra ID tokens (identity). With --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. Examples: locally chaos identity 403 --percentage 25 locally chaos identity 403 --percentage 100 --name my-app
Usage
locally chaos identity 403 [flags] locally chaos identity 403 [command]
Flags
-h, --help[=true|false] help for 403
--name string Scope this rule to one user or application, by name
--percentage int How often this fault fires, 0-100 (required)
--tenant string Tenant UUID (defaults to the configured default)
Subcommands
- locally chaos identity 403 reset - Remove one 403 rule, or put the whole fault back to zero.
locally chaos identity 403 reset
Remove one 403 rule, or put the whole fault back to zero.
Reset the 403 fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos identity 403 reset [flags]
Flags
-h, --help[=true|false] help for reset
--name string Scope this rule to one user or application, by name
--tenant string Tenant UUID (defaults to the configured default)
locally chaos identity 429
Answer requests with 429 Too Many Requests and a retry hint.
Answer requests with 429 Too Many Requests and a retry hint. On a database the engine's own throttling error is sent instead. Without scope flags this sets the fault's rate on Entra ID tokens (identity). With --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --retry-after sets the Retry-After header the fault answers with, such as 5s. Without one the service's usual hint is sent. A value flag left out keeps what the row already has; a new rule starts with none. 'reset' clears a row. Examples: locally chaos identity 429 --percentage 25 locally chaos identity 429 --percentage 25 --retry-after 5s locally chaos identity 429 --percentage 100 --name my-app
Usage
locally chaos identity 429 [flags] locally chaos identity 429 [command]
Flags
-h, --help[=true|false] help for 429
--name string Scope this rule to one user or application, by name
--percentage int How often this fault fires, 0-100 (required)
--retry-after string Retry-After this fault answers with, e.g. 5s or 500ms (the service's usual hint when omitted)
--tenant string Tenant UUID (defaults to the configured default)
Subcommands
- locally chaos identity 429 reset - Remove one 429 rule, or put the whole fault back to zero.
locally chaos identity 429 reset
Remove one 429 rule, or put the whole fault back to zero.
Reset the 429 fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos identity 429 reset [flags]
Flags
-h, --help[=true|false] help for reset
--name string Scope this rule to one user or application, by name
--tenant string Tenant UUID (defaults to the configured default)
locally chaos identity 500
Answer requests with 500 Internal Server Error.
Answer requests with 500 Internal Server Error. On a database the engine's own equivalent error is sent instead. Without scope flags this sets the fault's rate on Entra ID tokens (identity). With --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. Examples: locally chaos identity 500 --percentage 25 locally chaos identity 500 --percentage 100 --name my-app
Usage
locally chaos identity 500 [flags] locally chaos identity 500 [command]
Flags
-h, --help[=true|false] help for 500
--name string Scope this rule to one user or application, by name
--percentage int How often this fault fires, 0-100 (required)
--tenant string Tenant UUID (defaults to the configured default)
Subcommands
- locally chaos identity 500 reset - Remove one 500 rule, or put the whole fault back to zero.
locally chaos identity 500 reset
Remove one 500 rule, or put the whole fault back to zero.
Reset the 500 fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos identity 500 reset [flags]
Flags
-h, --help[=true|false] help for reset
--name string Scope this rule to one user or application, by name
--tenant string Tenant UUID (defaults to the configured default)
locally chaos identity clock-skew
Issue tokens whose nbf (not before) is 5 minutes in the future, as an authority with a skewed clock does.
Issue tokens whose nbf (not before) is 5 minutes in the future, as an authority with a skewed clock does. Without scope flags this sets the fault's rate on Entra ID tokens (identity). With --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. Examples: locally chaos identity clock-skew --percentage 25 locally chaos identity clock-skew --percentage 100 --name my-app
Usage
locally chaos identity clock-skew [flags] locally chaos identity clock-skew [command]
Flags
-h, --help[=true|false] help for clock-skew
--name string Scope this rule to one user or application, by name
--percentage int How often this fault fires, 0-100 (required)
--tenant string Tenant UUID (defaults to the configured default)
Subcommands
- locally chaos identity clock-skew reset - Remove one clock-skew rule, or put the whole fault back to zero.
locally chaos identity clock-skew reset
Remove one clock-skew rule, or put the whole fault back to zero.
Reset the clock-skew fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos identity clock-skew reset [flags]
Flags
-h, --help[=true|false] help for reset
--name string Scope this rule to one user or application, by name
--tenant string Tenant UUID (defaults to the configured default)
locally chaos identity disable
Turn chaos OFF for the directory and identity.
Turn chaos OFF for the directory and identity. Disabling keeps every fault's configuration, so a later enable restores it. The directory and identity surfaces share one master switch: this is the same switch as 'locally chaos directory disable' and 'locally chaos identity disable'.
Usage
locally chaos identity disable [flags]
Flags
-h, --help[=true|false] help for disable
--tenant string Tenant UUID (defaults to the configured default)
locally chaos identity discovery-unavailable
Answer the OpenID Connect metadata endpoint (/.well-known/openid-configuration) with 503.
Answer the OpenID Connect metadata endpoint (/.well-known/openid-configuration) with 503. Without scope flags this sets the fault's rate on Entra ID tokens (identity). With --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. Examples: locally chaos identity discovery-unavailable --percentage 25 locally chaos identity discovery-unavailable --percentage 100 --name my-app
Usage
locally chaos identity discovery-unavailable [flags] locally chaos identity discovery-unavailable [command]
Flags
-h, --help[=true|false] help for discovery-unavailable
--name string Scope this rule to one user or application, by name
--percentage int How often this fault fires, 0-100 (required)
--tenant string Tenant UUID (defaults to the configured default)
Subcommands
- locally chaos identity discovery-unavailable reset - Remove one discovery-unavailable rule, or put the whole fault back to zero.
locally chaos identity discovery-unavailable reset
Remove one discovery-unavailable rule, or put the whole fault back to zero.
Reset the discovery-unavailable fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos identity discovery-unavailable reset [flags]
Flags
-h, --help[=true|false] help for reset
--name string Scope this rule to one user or application, by name
--tenant string Tenant UUID (defaults to the configured default)
locally chaos identity drop-connection
Close the connection without answering.
Close the connection without answering. The client sees the connection reset, with no status code or error body. Without scope flags this sets the fault's rate on Entra ID tokens (identity). With --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. Examples: locally chaos identity drop-connection --percentage 25 locally chaos identity drop-connection --percentage 100 --name my-app
Usage
locally chaos identity drop-connection [flags] locally chaos identity drop-connection [command]
Flags
-h, --help[=true|false] help for drop-connection
--name string Scope this rule to one user or application, by name
--percentage int How often this fault fires, 0-100 (required)
--tenant string Tenant UUID (defaults to the configured default)
Subcommands
- locally chaos identity drop-connection reset - Remove one drop-connection rule, or put the whole fault back to zero.
locally chaos identity drop-connection reset
Remove one drop-connection rule, or put the whole fault back to zero.
Reset the drop-connection fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos identity drop-connection reset [flags]
Flags
-h, --help[=true|false] help for reset
--name string Scope this rule to one user or application, by name
--tenant string Tenant UUID (defaults to the configured default)
locally chaos identity enable
Turn chaos ON for the directory and identity.
Turn chaos ON for the directory and identity. Disabling keeps every fault's configuration, so a later enable restores it. The directory and identity surfaces share one master switch: this is the same switch as 'locally chaos directory enable' and 'locally chaos identity enable'.
Usage
locally chaos identity enable [flags]
Flags
-h, --help[=true|false] help for enable
--tenant string Tenant UUID (defaults to the configured default)
locally chaos identity incident
Take each resource down for a while, then bring it back.
Take each resource down for a while, then bring it back. Every interval each resource (or, on the directory and identity surfaces, the tenant) rolls against the percentage; on a hit every request to it fails for the rolled duration, answered as an outage would be, then it recovers on its own. Compare outage, which fails requests for as long as it is armed. Without scope flags this sets the fault's rate on Entra ID tokens (identity). With --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --seconds and --millis set the duration. A bare number is in the flag's unit; one with its own suffix, such as 250ms or 1.5s, means what it says. One value N picks 0 to N each time; MIN-MAX, such as 30-120, picks within that range. A duration is required whenever the fault fires. --interval is how often the fault starts, such as 10m. It is required whenever the fault fires: nothing else sets it off. A value flag left out keeps what the row already has; a new rule starts with none. 'reset' clears a row. Examples: locally chaos identity incident --percentage 25 --seconds 30-120 --interval 10m locally chaos identity incident --percentage 100 --seconds 30-120 --interval 10m --name my-app
Usage
locally chaos identity incident [flags] locally chaos identity incident [command]
Flags
-h, --help[=true|false] help for incident
--interval string How often this fault rolls for each resource, e.g. 10m; the first roll lands at a random point within the first interval (required when it fires)
--millis string Duration in milliseconds, e.g. 250; N for 0 to N, or MIN-MAX for a range
--name string Scope this rule to one user or application, by name
--percentage int How often this fault fires, 0-100 (required)
--seconds string Duration in seconds, e.g. 30 or 1.5; N for 0 to N, or MIN-MAX for a range
--tenant string Tenant UUID (defaults to the configured default)
Subcommands
- locally chaos identity incident reset - Remove one incident rule, or put the whole fault back to zero.
locally chaos identity incident reset
Remove one incident rule, or put the whole fault back to zero.
Reset the incident fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos identity incident reset [flags]
Flags
-h, --help[=true|false] help for reset
--name string Scope this rule to one user or application, by name
--tenant string Tenant UUID (defaults to the configured default)
locally chaos identity invalid-grant
Refuse refresh token redemptions with invalid_grant (AADSTS700082), as if the refresh token had expired.
Refuse refresh token redemptions with invalid_grant (AADSTS700082), as if the refresh token had expired. Without scope flags this sets the fault's rate on Entra ID tokens (identity). With --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. Examples: locally chaos identity invalid-grant --percentage 25 locally chaos identity invalid-grant --percentage 100 --name my-app
Usage
locally chaos identity invalid-grant [flags] locally chaos identity invalid-grant [command]
Flags
-h, --help[=true|false] help for invalid-grant
--name string Scope this rule to one user or application, by name
--percentage int How often this fault fires, 0-100 (required)
--tenant string Tenant UUID (defaults to the configured default)
Subcommands
- locally chaos identity invalid-grant reset - Remove one invalid-grant rule, or put the whole fault back to zero.
locally chaos identity invalid-grant reset
Remove one invalid-grant rule, or put the whole fault back to zero.
Reset the invalid-grant fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos identity invalid-grant reset [flags]
Flags
-h, --help[=true|false] help for reset
--name string Scope this rule to one user or application, by name
--tenant string Tenant UUID (defaults to the configured default)
locally chaos identity jwks-unavailable
Answer the signing keys endpoint (/discovery/v2.0/keys) with 503, so token validation cannot fetch the keys.
Answer the signing keys endpoint (/discovery/v2.0/keys) with 503, so token validation cannot fetch the keys. Without scope flags this sets the fault's rate on Entra ID tokens (identity). With --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. Examples: locally chaos identity jwks-unavailable --percentage 25 locally chaos identity jwks-unavailable --percentage 100 --name my-app
Usage
locally chaos identity jwks-unavailable [flags] locally chaos identity jwks-unavailable [command]
Flags
-h, --help[=true|false] help for jwks-unavailable
--name string Scope this rule to one user or application, by name
--percentage int How often this fault fires, 0-100 (required)
--tenant string Tenant UUID (defaults to the configured default)
Subcommands
- locally chaos identity jwks-unavailable reset - Remove one jwks-unavailable rule, or put the whole fault back to zero.
locally chaos identity jwks-unavailable reset
Remove one jwks-unavailable rule, or put the whole fault back to zero.
Reset the jwks-unavailable fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos identity jwks-unavailable reset [flags]
Flags
-h, --help[=true|false] help for reset
--name string Scope this rule to one user or application, by name
--tenant string Tenant UUID (defaults to the configured default)
locally chaos identity latency
Hold requests for a random delay before they are handled.
Hold requests for a random delay before they are handled. The response is unchanged, just late. Without scope flags this sets the fault's rate on Entra ID tokens (identity). With --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --seconds and --millis set the duration. A bare number is in the flag's unit; one with its own suffix, such as 250ms or 1.5s, means what it says. The value is a maximum: each firing picks 0 to N. A duration is required whenever the fault fires. A value flag left out keeps what the row already has; a new rule starts with none. 'reset' clears a row. Examples: locally chaos identity latency --percentage 25 --seconds 30 locally chaos identity latency --percentage 100 --seconds 30 --name my-app
Usage
locally chaos identity latency [flags] locally chaos identity latency [command]
Flags
-h, --help[=true|false] help for latency
--millis string Duration in milliseconds, e.g. 250; the maximum: each firing picks 0 to N
--name string Scope this rule to one user or application, by name
--percentage int How often this fault fires, 0-100 (required)
--seconds string Duration in seconds, e.g. 30 or 1.5; the maximum: each firing picks 0 to N
--tenant string Tenant UUID (defaults to the configured default)
Subcommands
- locally chaos identity latency reset - Remove one latency rule, or put the whole fault back to zero.
locally chaos identity latency reset
Remove one latency rule, or put the whole fault back to zero.
Reset the latency fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos identity latency reset [flags]
Flags
-h, --help[=true|false] help for reset
--name string Scope this rule to one user or application, by name
--tenant string Tenant UUID (defaults to the configured default)
locally chaos identity msi-unavailable
Fail managed identity token requests with 500 or 503 from the MSI endpoint the app calls.
Fail managed identity token requests with 500 or 503 from the MSI endpoint the app calls. Without scope flags this sets the fault's rate on Entra ID tokens (identity). With --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. Examples: locally chaos identity msi-unavailable --percentage 25 locally chaos identity msi-unavailable --percentage 100 --name my-app
Usage
locally chaos identity msi-unavailable [flags] locally chaos identity msi-unavailable [command]
Flags
-h, --help[=true|false] help for msi-unavailable
--name string Scope this rule to one user or application, by name
--percentage int How often this fault fires, 0-100 (required)
--tenant string Tenant UUID (defaults to the configured default)
Subcommands
- locally chaos identity msi-unavailable reset - Remove one msi-unavailable rule, or put the whole fault back to zero.
locally chaos identity msi-unavailable reset
Remove one msi-unavailable rule, or put the whole fault back to zero.
Reset the msi-unavailable fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos identity msi-unavailable reset [flags]
Flags
-h, --help[=true|false] help for reset
--name string Scope this rule to one user or application, by name
--tenant string Tenant UUID (defaults to the configured default)
locally chaos identity outage
Fail requests for as long as the rule is armed, like a region or service that is down.
Fail requests for as long as the rule is armed, like a region or service that is down. Each request rolls against the percentage, so at 100 every request fails until the fault is turned off. Each service answers in its own terms, usually 503 Service Unavailable, and a protocol with live connections also closes the ones open when the outage starts. For downtime that ends by itself, see incident. Without scope flags this sets the fault's rate on Entra ID tokens (identity). With --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --retry-after sets the Retry-After header the fault answers with, such as 5s. Without one the service's usual hint is sent. A value flag left out keeps what the row already has; a new rule starts with none. 'reset' clears a row. Examples: locally chaos identity outage --percentage 25 locally chaos identity outage --percentage 25 --retry-after 5s locally chaos identity outage --percentage 100 --name my-app
Usage
locally chaos identity outage [flags] locally chaos identity outage [command]
Flags
-h, --help[=true|false] help for outage
--name string Scope this rule to one user or application, by name
--percentage int How often this fault fires, 0-100 (required)
--retry-after string Retry-After this fault answers with, e.g. 5s or 500ms (the service's usual hint when omitted)
--tenant string Tenant UUID (defaults to the configured default)
Subcommands
- locally chaos identity outage reset - Remove one outage rule, or put the whole fault back to zero.
locally chaos identity outage reset
Remove one outage rule, or put the whole fault back to zero.
Reset the outage fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos identity outage reset [flags]
Flags
-h, --help[=true|false] help for reset
--name string Scope this rule to one user or application, by name
--tenant string Tenant UUID (defaults to the configured default)
locally chaos identity reset
Zero every Entra ID tokens (identity) fault and drop every rule.
Zero every Entra ID tokens (identity) fault and drop every rule. Examples: locally chaos identity reset
Usage
locally chaos identity reset [flags]
Flags
-h, --help[=true|false] help for reset
--tenant string Tenant UUID (defaults to the configured default)
locally chaos identity show
Print the current Entra ID tokens (identity) chaos configuration.
Print the current Entra ID tokens (identity) chaos configuration. Examples: locally chaos identity show
Usage
locally chaos identity show [flags]
Flags
-h, --help[=true|false] help for show
--tenant string Tenant UUID (defaults to the configured default)
locally chaos identity slow-down
Answer device code token polls with slow_down, so the client has to poll less often.
Answer device code token polls with slow_down, so the client has to poll less often. Without scope flags this sets the fault's rate on Entra ID tokens (identity). With --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. Examples: locally chaos identity slow-down --percentage 25 locally chaos identity slow-down --percentage 100 --name my-app
Usage
locally chaos identity slow-down [flags] locally chaos identity slow-down [command]
Flags
-h, --help[=true|false] help for slow-down
--name string Scope this rule to one user or application, by name
--percentage int How often this fault fires, 0-100 (required)
--tenant string Tenant UUID (defaults to the configured default)
Subcommands
- locally chaos identity slow-down reset - Remove one slow-down rule, or put the whole fault back to zero.
locally chaos identity slow-down reset
Remove one slow-down rule, or put the whole fault back to zero.
Reset the slow-down fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos identity slow-down reset [flags]
Flags
-h, --help[=true|false] help for reset
--name string Scope this rule to one user or application, by name
--tenant string Tenant UUID (defaults to the configured default)
During Public Preview you can use the Team plan for free, and get an early-adopter discount at GA. Sign in