During Public Preview you can use the Team plan for free, and get an early-adopter discount at GA. Sign in
locally chaos containerregistry
This page is part of the CLI Reference and is generated from the CLI's own help output, so it matches what locally chaos containerregistry --help prints.
For more information see Chaos Engineering and Container Registry Emulator.
locally chaos containerregistry
Simulate Container Registry (data plane) failure modes.
Simulate Container Registry (data plane) failure modes. A fault command sets the fault's rate. With a scope flag (--location / --name) it adds or edits a rule instead. Examples: locally chaos containerregistry <fault> --percentage N locally chaos containerregistry <fault> reset locally chaos containerregistry show locally chaos containerregistry reset
Usage
locally chaos containerregistry [flags] locally chaos containerregistry [command]
Flags
-h, --help[=true|false] help for containerregistry
Subcommands
- locally chaos containerregistry 403 - Answer requests with 403, as when a role assignment has not replicated yet.
- locally chaos containerregistry 429 - Answer requests with 429 Too Many Requests and a retry hint.
- locally chaos containerregistry 500 - Answer requests with 500 Internal Server Error.
- locally chaos containerregistry drop-connection - Close the connection without answering.
- locally chaos containerregistry incident - Take each resource down for a while, then bring it back.
- locally chaos containerregistry latency - Hold requests for a random delay before they are handled.
- locally chaos containerregistry outage - Fail requests for as long as the rule is armed, like a region or service that is down.
- locally chaos containerregistry partial-response - Send the status, headers and part of the body, then cut the connection.
- locally chaos containerregistry reset - Zero every Container Registry (data plane) fault and drop every rule.
- locally chaos containerregistry show - Print the current Container Registry (data plane) chaos configuration.
- locally chaos containerregistry slow-body - Slow the response body down.
locally chaos containerregistry 403
Answer requests with 403, as when a role assignment has not replicated yet.
Answer requests with 403, as when a role assignment has not replicated yet. On the control plane the error code is AuthorizationFailed; on a database the engine's own equivalent error is sent instead. Without scope flags this sets the fault's rate on Container Registry (data plane). With --location / --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --name acct1 matches that resource in any resource group; --name rg1/acct1 matches only rg1's. Examples: locally chaos containerregistry 403 --percentage 25 locally chaos containerregistry 403 --percentage 100 --location london locally chaos containerregistry 403 reset --location london locally chaos containerregistry 403 --percentage 100 --name acct1
Usage
locally chaos containerregistry 403 [flags] locally chaos containerregistry 403 [command]
Flags
-h, --help[=true|false] help for 403
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--percentage int How often this fault fires, 0-100 (required)
--subscription string Subscription UUID (defaults to the configured default)
Subcommands
- locally chaos containerregistry 403 reset - Remove one 403 rule, or put the whole fault back to zero.
locally chaos containerregistry 403 reset
Remove one 403 rule, or put the whole fault back to zero.
Reset the 403 fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos containerregistry 403 reset [flags]
Flags
-h, --help[=true|false] help for reset
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--subscription string Subscription UUID (defaults to the configured default)
locally chaos containerregistry 429
Answer requests with 429 Too Many Requests and a retry hint.
Answer requests with 429 Too Many Requests and a retry hint. On a database the engine's own throttling error is sent instead. Without scope flags this sets the fault's rate on Container Registry (data plane). With --location / --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --name acct1 matches that resource in any resource group; --name rg1/acct1 matches only rg1's. --retry-after sets the Retry-After header the fault answers with, such as 5s. Without one the service's usual hint is sent. A value flag left out keeps what the row already has; a new rule starts with none. 'reset' clears a row. Examples: locally chaos containerregistry 429 --percentage 25 locally chaos containerregistry 429 --percentage 25 --retry-after 5s locally chaos containerregistry 429 --percentage 100 --location london locally chaos containerregistry 429 reset --location london locally chaos containerregistry 429 --percentage 100 --name acct1
Usage
locally chaos containerregistry 429 [flags] locally chaos containerregistry 429 [command]
Flags
-h, --help[=true|false] help for 429
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--percentage int How often this fault fires, 0-100 (required)
--retry-after string Retry-After this fault answers with, e.g. 5s or 500ms (the service's usual hint when omitted)
--subscription string Subscription UUID (defaults to the configured default)
Subcommands
- locally chaos containerregistry 429 reset - Remove one 429 rule, or put the whole fault back to zero.
locally chaos containerregistry 429 reset
Remove one 429 rule, or put the whole fault back to zero.
Reset the 429 fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos containerregistry 429 reset [flags]
Flags
-h, --help[=true|false] help for reset
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--subscription string Subscription UUID (defaults to the configured default)
locally chaos containerregistry 500
Answer requests with 500 Internal Server Error.
Answer requests with 500 Internal Server Error. On a database the engine's own equivalent error is sent instead. Without scope flags this sets the fault's rate on Container Registry (data plane). With --location / --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --name acct1 matches that resource in any resource group; --name rg1/acct1 matches only rg1's. Examples: locally chaos containerregistry 500 --percentage 25 locally chaos containerregistry 500 --percentage 100 --location london locally chaos containerregistry 500 reset --location london locally chaos containerregistry 500 --percentage 100 --name acct1
Usage
locally chaos containerregistry 500 [flags] locally chaos containerregistry 500 [command]
Flags
-h, --help[=true|false] help for 500
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--percentage int How often this fault fires, 0-100 (required)
--subscription string Subscription UUID (defaults to the configured default)
Subcommands
- locally chaos containerregistry 500 reset - Remove one 500 rule, or put the whole fault back to zero.
locally chaos containerregistry 500 reset
Remove one 500 rule, or put the whole fault back to zero.
Reset the 500 fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos containerregistry 500 reset [flags]
Flags
-h, --help[=true|false] help for reset
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--subscription string Subscription UUID (defaults to the configured default)
locally chaos containerregistry drop-connection
Close the connection without answering.
Close the connection without answering. The client sees the connection reset, with no status code or error body. Without scope flags this sets the fault's rate on Container Registry (data plane). With --location / --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --name acct1 matches that resource in any resource group; --name rg1/acct1 matches only rg1's. Examples: locally chaos containerregistry drop-connection --percentage 25 locally chaos containerregistry drop-connection --percentage 100 --location london locally chaos containerregistry drop-connection reset --location london locally chaos containerregistry drop-connection --percentage 100 --name acct1
Usage
locally chaos containerregistry drop-connection [flags] locally chaos containerregistry drop-connection [command]
Flags
-h, --help[=true|false] help for drop-connection
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--percentage int How often this fault fires, 0-100 (required)
--subscription string Subscription UUID (defaults to the configured default)
Subcommands
- locally chaos containerregistry drop-connection reset - Remove one drop-connection rule, or put the whole fault back to zero.
locally chaos containerregistry drop-connection reset
Remove one drop-connection rule, or put the whole fault back to zero.
Reset the drop-connection fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos containerregistry drop-connection reset [flags]
Flags
-h, --help[=true|false] help for reset
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--subscription string Subscription UUID (defaults to the configured default)
locally chaos containerregistry incident
Take each resource down for a while, then bring it back.
Take each resource down for a while, then bring it back. Every interval each resource (or, on the directory and identity surfaces, the tenant) rolls against the percentage; on a hit every request to it fails for the rolled duration, answered as an outage would be, then it recovers on its own. Compare outage, which fails requests for as long as it is armed. Without scope flags this sets the fault's rate on Container Registry (data plane). With --location / --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --name acct1 matches that resource in any resource group; --name rg1/acct1 matches only rg1's. --seconds and --millis set the duration. A bare number is in the flag's unit; one with its own suffix, such as 250ms or 1.5s, means what it says. One value N picks 0 to N each time; MIN-MAX, such as 30-120, picks within that range. A duration is required whenever the fault fires. --interval is how often the fault starts, such as 10m. It is required whenever the fault fires: nothing else sets it off. A value flag left out keeps what the row already has; a new rule starts with none. 'reset' clears a row. Examples: locally chaos containerregistry incident --percentage 25 --seconds 30-120 --interval 10m locally chaos containerregistry incident --percentage 100 --seconds 30-120 --interval 10m --location london locally chaos containerregistry incident reset --location london locally chaos containerregistry incident --percentage 100 --seconds 30-120 --interval 10m --name acct1
Usage
locally chaos containerregistry incident [flags] locally chaos containerregistry incident [command]
Flags
-h, --help[=true|false] help for incident
--interval string How often this fault rolls for each resource, e.g. 10m; the first roll lands at a random point within the first interval (required when it fires)
--location string Scope this rule to one location, e.g. london
--millis string Duration in milliseconds, e.g. 250; N for 0 to N, or MIN-MAX for a range
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--percentage int How often this fault fires, 0-100 (required)
--seconds string Duration in seconds, e.g. 30 or 1.5; N for 0 to N, or MIN-MAX for a range
--subscription string Subscription UUID (defaults to the configured default)
Subcommands
- locally chaos containerregistry incident reset - Remove one incident rule, or put the whole fault back to zero.
locally chaos containerregistry incident reset
Remove one incident rule, or put the whole fault back to zero.
Reset the incident fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos containerregistry incident reset [flags]
Flags
-h, --help[=true|false] help for reset
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--subscription string Subscription UUID (defaults to the configured default)
locally chaos containerregistry latency
Hold requests for a random delay before they are handled.
Hold requests for a random delay before they are handled. The response is unchanged, just late. Without scope flags this sets the fault's rate on Container Registry (data plane). With --location / --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --name acct1 matches that resource in any resource group; --name rg1/acct1 matches only rg1's. --seconds and --millis set the duration. A bare number is in the flag's unit; one with its own suffix, such as 250ms or 1.5s, means what it says. The value is a maximum: each firing picks 0 to N. A duration is required whenever the fault fires. A value flag left out keeps what the row already has; a new rule starts with none. 'reset' clears a row. Examples: locally chaos containerregistry latency --percentage 25 --seconds 30 locally chaos containerregistry latency --percentage 100 --seconds 30 --location london locally chaos containerregistry latency reset --location london locally chaos containerregistry latency --percentage 100 --seconds 30 --name acct1
Usage
locally chaos containerregistry latency [flags] locally chaos containerregistry latency [command]
Flags
-h, --help[=true|false] help for latency
--location string Scope this rule to one location, e.g. london
--millis string Duration in milliseconds, e.g. 250; the maximum: each firing picks 0 to N
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--percentage int How often this fault fires, 0-100 (required)
--seconds string Duration in seconds, e.g. 30 or 1.5; the maximum: each firing picks 0 to N
--subscription string Subscription UUID (defaults to the configured default)
Subcommands
- locally chaos containerregistry latency reset - Remove one latency rule, or put the whole fault back to zero.
locally chaos containerregistry latency reset
Remove one latency rule, or put the whole fault back to zero.
Reset the latency fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos containerregistry latency reset [flags]
Flags
-h, --help[=true|false] help for reset
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--subscription string Subscription UUID (defaults to the configured default)
locally chaos containerregistry outage
Fail requests for as long as the rule is armed, like a region or service that is down.
Fail requests for as long as the rule is armed, like a region or service that is down. Each request rolls against the percentage, so at 100 every request fails until the fault is turned off. Each service answers in its own terms, usually 503 Service Unavailable, and a protocol with live connections also closes the ones open when the outage starts. For downtime that ends by itself, see incident. Without scope flags this sets the fault's rate on Container Registry (data plane). With --location / --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --name acct1 matches that resource in any resource group; --name rg1/acct1 matches only rg1's. --retry-after sets the Retry-After header the fault answers with, such as 5s. Without one the service's usual hint is sent. A value flag left out keeps what the row already has; a new rule starts with none. 'reset' clears a row. Examples: locally chaos containerregistry outage --percentage 25 locally chaos containerregistry outage --percentage 25 --retry-after 5s locally chaos containerregistry outage --percentage 100 --location london locally chaos containerregistry outage reset --location london locally chaos containerregistry outage --percentage 100 --name acct1
Usage
locally chaos containerregistry outage [flags] locally chaos containerregistry outage [command]
Flags
-h, --help[=true|false] help for outage
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--percentage int How often this fault fires, 0-100 (required)
--retry-after string Retry-After this fault answers with, e.g. 5s or 500ms (the service's usual hint when omitted)
--subscription string Subscription UUID (defaults to the configured default)
Subcommands
- locally chaos containerregistry outage reset - Remove one outage rule, or put the whole fault back to zero.
locally chaos containerregistry outage reset
Remove one outage rule, or put the whole fault back to zero.
Reset the outage fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos containerregistry outage reset [flags]
Flags
-h, --help[=true|false] help for reset
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--subscription string Subscription UUID (defaults to the configured default)
locally chaos containerregistry partial-response
Send the status, headers and part of the body, then cut the connection.
Send the status, headers and part of the body, then cut the connection. The client sees a response that ends early. Without scope flags this sets the fault's rate on Container Registry (data plane). With --location / --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --name acct1 matches that resource in any resource group; --name rg1/acct1 matches only rg1's. Examples: locally chaos containerregistry partial-response --percentage 25 locally chaos containerregistry partial-response --percentage 100 --location london locally chaos containerregistry partial-response reset --location london locally chaos containerregistry partial-response --percentage 100 --name acct1
Usage
locally chaos containerregistry partial-response [flags] locally chaos containerregistry partial-response [command]
Flags
-h, --help[=true|false] help for partial-response
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--percentage int How often this fault fires, 0-100 (required)
--subscription string Subscription UUID (defaults to the configured default)
Subcommands
- locally chaos containerregistry partial-response reset - Remove one partial-response rule, or put the whole fault back to zero.
locally chaos containerregistry partial-response reset
Remove one partial-response rule, or put the whole fault back to zero.
Reset the partial-response fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos containerregistry partial-response reset [flags]
Flags
-h, --help[=true|false] help for reset
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--subscription string Subscription UUID (defaults to the configured default)
locally chaos containerregistry reset
Zero every Container Registry (data plane) fault and drop every rule.
Zero every Container Registry (data plane) fault and drop every rule. Examples: locally chaos containerregistry reset
Usage
locally chaos containerregistry reset [flags]
Flags
-h, --help[=true|false] help for reset
--subscription string Subscription UUID (defaults to the configured default)
locally chaos containerregistry show
Print the current Container Registry (data plane) chaos configuration.
Print the current Container Registry (data plane) chaos configuration. Examples: locally chaos containerregistry show
Usage
locally chaos containerregistry show [flags]
Flags
-h, --help[=true|false] help for show
--subscription string Subscription UUID (defaults to the configured default)
locally chaos containerregistry slow-body
Slow the response body down.
Slow the response body down. The status and headers arrive as usual, then the body is written with a pause before every write. Without scope flags this sets the fault's rate on Container Registry (data plane). With --location / --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --name acct1 matches that resource in any resource group; --name rg1/acct1 matches only rg1's. --seconds and --millis set the duration. A bare number is in the flag's unit; one with its own suffix, such as 250ms or 1.5s, means what it says. One value N picks 0 to N each time; MIN-MAX, such as 30-120, picks within that range. A duration is required whenever the fault fires. A value flag left out keeps what the row already has; a new rule starts with none. 'reset' clears a row. Examples: locally chaos containerregistry slow-body --percentage 25 --millis 100-800 locally chaos containerregistry slow-body --percentage 100 --millis 100-800 --location london locally chaos containerregistry slow-body reset --location london locally chaos containerregistry slow-body --percentage 100 --millis 100-800 --name acct1
Usage
locally chaos containerregistry slow-body [flags] locally chaos containerregistry slow-body [command]
Flags
-h, --help[=true|false] help for slow-body
--location string Scope this rule to one location, e.g. london
--millis string Duration in milliseconds, e.g. 250; N for 0 to N, or MIN-MAX for a range
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--percentage int How often this fault fires, 0-100 (required)
--seconds string Duration in seconds, e.g. 30 or 1.5; N for 0 to N, or MIN-MAX for a range
--subscription string Subscription UUID (defaults to the configured default)
Subcommands
- locally chaos containerregistry slow-body reset - Remove one slow-body rule, or put the whole fault back to zero.
locally chaos containerregistry slow-body reset
Remove one slow-body rule, or put the whole fault back to zero.
Reset the slow-body fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos containerregistry slow-body reset [flags]
Flags
-h, --help[=true|false] help for reset
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--subscription string Subscription UUID (defaults to the configured default)
During Public Preview you can use the Team plan for free, and get an early-adopter discount at GA. Sign in