locally chaos apimanagement

Preview

During Public Preview you can use the Team plan for free, and get an early-adopter discount at GA. Sign in

locally chaos apimanagement

This page is part of the CLI Reference and is generated from the CLI's own help output, so it matches what locally chaos apimanagement --help prints.

For more information see Chaos Engineering and API Management Emulator.

locally chaos apimanagement

Simulate API Management (data plane) failure modes.

Simulate API Management (data plane) failure modes.

A fault command sets the fault's rate. With a scope flag (--location / --name)
it adds or edits a rule instead.

Examples:
locally chaos apimanagement <fault> --percentage N
  locally chaos apimanagement <fault> reset
  locally chaos apimanagement show
  locally chaos apimanagement reset

Usage

locally chaos apimanagement [flags]
  locally chaos apimanagement [command]

Flags

-h, --help[=true|false]   help for apimanagement

Subcommands

locally chaos apimanagement 403

Answer requests with 403, as when a role assignment has not replicated yet.

Answer requests with 403, as when a role assignment has not replicated yet. On
the control plane the error code is AuthorizationFailed; on a database the
engine's own equivalent error is sent instead.

Without scope flags this sets the fault's rate on API Management (data plane).
With --location / --name it adds or edits one rule, leaving the rate and other
rules alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

Examples:
locally chaos apimanagement 403 --percentage 25
  locally chaos apimanagement 403 --percentage 100 --location london
  locally chaos apimanagement 403 reset --location london
  locally chaos apimanagement 403 --percentage 100 --name acct1

Usage

locally chaos apimanagement 403 [flags]
  locally chaos apimanagement 403 [command]

Flags

-h, --help[=true|false]     help for 403
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos apimanagement 403 reset

Remove one 403 rule, or put the whole fault back to zero.

Reset the 403 fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos apimanagement 403 reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos apimanagement 429

Answer requests with 429 Too Many Requests and a retry hint.

Answer requests with 429 Too Many Requests and a retry hint. On a database the
engine's own throttling error is sent instead.

Without scope flags this sets the fault's rate on API Management (data plane).
With --location / --name it adds or edits one rule, leaving the rate and other
rules alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

--retry-after sets the Retry-After header the fault answers with, such as 5s.
Without one the service's usual hint is sent.

A value flag left out keeps what the row already has; a new rule starts with
none. 'reset' clears a row.

Examples:
locally chaos apimanagement 429 --percentage 25
  locally chaos apimanagement 429 --percentage 25 --retry-after 5s
  locally chaos apimanagement 429 --percentage 100 --location london
  locally chaos apimanagement 429 reset --location london
  locally chaos apimanagement 429 --percentage 100 --name acct1

Usage

locally chaos apimanagement 429 [flags]
  locally chaos apimanagement 429 [command]

Flags

-h, --help[=true|false]     help for 429
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --retry-after string    Retry-After this fault answers with, e.g. 5s or 500ms (the service's usual hint when omitted)
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos apimanagement 429 reset

Remove one 429 rule, or put the whole fault back to zero.

Reset the 429 fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos apimanagement 429 reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos apimanagement 500

Answer requests with 500 Internal Server Error.

Answer requests with 500 Internal Server Error. On a database the engine's own
equivalent error is sent instead.

Without scope flags this sets the fault's rate on API Management (data plane).
With --location / --name it adds or edits one rule, leaving the rate and other
rules alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

Examples:
locally chaos apimanagement 500 --percentage 25
  locally chaos apimanagement 500 --percentage 100 --location london
  locally chaos apimanagement 500 reset --location london
  locally chaos apimanagement 500 --percentage 100 --name acct1

Usage

locally chaos apimanagement 500 [flags]
  locally chaos apimanagement 500 [command]

Flags

-h, --help[=true|false]     help for 500
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos apimanagement 500 reset

Remove one 500 rule, or put the whole fault back to zero.

Reset the 500 fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos apimanagement 500 reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos apimanagement 502

Answer requests with 502 Bad Gateway from the service's front end, as when it cannot reach the app behind it.

Answer requests with 502 Bad Gateway from the service's front end, as when it
cannot reach the app behind it. The app never sees the request.

Without scope flags this sets the fault's rate on API Management (data plane).
With --location / --name it adds or edits one rule, leaving the rate and other
rules alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

Examples:
locally chaos apimanagement 502 --percentage 25
  locally chaos apimanagement 502 --percentage 100 --location london
  locally chaos apimanagement 502 reset --location london
  locally chaos apimanagement 502 --percentage 100 --name acct1

Usage

locally chaos apimanagement 502 [flags]
  locally chaos apimanagement 502 [command]

Flags

-h, --help[=true|false]     help for 502
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos apimanagement 502 reset

Remove one 502 rule, or put the whole fault back to zero.

Reset the 502 fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos apimanagement 502 reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos apimanagement 504

Answer requests with 504 Gateway Timeout from the service's front end, as when the app behind it takes too long.

Answer requests with 504 Gateway Timeout from the service's front end, as when
the app behind it takes too long. The app never sees the request.

Without scope flags this sets the fault's rate on API Management (data plane).
With --location / --name it adds or edits one rule, leaving the rate and other
rules alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

Examples:
locally chaos apimanagement 504 --percentage 25
  locally chaos apimanagement 504 --percentage 100 --location london
  locally chaos apimanagement 504 reset --location london
  locally chaos apimanagement 504 --percentage 100 --name acct1

Usage

locally chaos apimanagement 504 [flags]
  locally chaos apimanagement 504 [command]

Flags

-h, --help[=true|false]     help for 504
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos apimanagement 504 reset

Remove one 504 rule, or put the whole fault back to zero.

Reset the 504 fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos apimanagement 504 reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos apimanagement disconnect

Close live connections cleanly, in the protocol's own terms, so the client has to reconnect.

Close live connections cleanly, in the protocol's own terms, so the client has
to reconnect. Every interval each open connection is rolled for. Compare
drop-connection, which cuts them with nothing said.

Without scope flags this sets the fault's rate on API Management (data plane).
With --location / --name it adds or edits one rule, leaving the rate and other
rules alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

--interval is how often the fault starts, such as 10m. It is required whenever
the fault fires: nothing else sets it off.

A value flag left out keeps what the row already has; a new rule starts with
none. 'reset' clears a row.

Examples:
locally chaos apimanagement disconnect --percentage 25 --interval 10m
  locally chaos apimanagement disconnect --percentage 100 --interval 10m --location london
  locally chaos apimanagement disconnect reset --location london
  locally chaos apimanagement disconnect --percentage 100 --interval 10m --name acct1

Usage

locally chaos apimanagement disconnect [flags]
  locally chaos apimanagement disconnect [command]

Flags

-h, --help[=true|false]     help for disconnect
      --interval string       How often this fault rolls for each resource, e.g. 10m; the first roll lands at a random point within the first interval (required when it fires)
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos apimanagement disconnect reset

Remove one disconnect rule, or put the whole fault back to zero.

Reset the disconnect fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos apimanagement disconnect reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos apimanagement drop-connection

Close the connection without answering.

Close the connection without answering. The client sees the connection reset,
with no status code or error body. With --interval it also cuts live
connections: every interval each is rolled for, and on a hit it is reset with
nothing said - no close frame or goodbye. For a clean close, use disconnect.

Without scope flags this sets the fault's rate on API Management (data plane).
With --location / --name it adds or edits one rule, leaving the rate and other
rules alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

--interval adds periodic action on live connections, such as every 30s, to the
fault's per-request behaviour, which carries on as before. For periodic cuts
with no per-request drops, arm disconnect instead.

A value flag left out keeps what the row already has; a new rule starts with
none. 'reset' clears a row.

Examples:
locally chaos apimanagement drop-connection --percentage 25
  locally chaos apimanagement drop-connection --percentage 25 --interval 30s
  locally chaos apimanagement drop-connection --percentage 100 --location london
  locally chaos apimanagement drop-connection reset --location london
  locally chaos apimanagement drop-connection --percentage 100 --name acct1

Usage

locally chaos apimanagement drop-connection [flags]
  locally chaos apimanagement drop-connection [command]

Flags

-h, --help[=true|false]     help for drop-connection
      --interval string       Also act on live connections this often, e.g. 30s or 10m (adds to the per-request fault; use disconnect for periodic cuts only)
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos apimanagement drop-connection reset

Remove one drop-connection rule, or put the whole fault back to zero.

Reset the drop-connection fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos apimanagement drop-connection reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos apimanagement incident

Take each resource down for a while, then bring it back.

Take each resource down for a while, then bring it back. Every interval each
resource (or, on the directory and identity surfaces, the tenant) rolls against
the percentage; on a hit every request to it fails for the rolled duration,
answered as an outage would be, then it recovers on its own. Compare outage,
which fails requests for as long as it is armed.

Without scope flags this sets the fault's rate on API Management (data plane).
With --location / --name it adds or edits one rule, leaving the rate and other
rules alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

--seconds and --millis set the duration. A bare number is in the flag's unit;
one with its own suffix, such as 250ms or 1.5s, means what it says. One value N
picks 0 to N each time; MIN-MAX, such as 30-120, picks within that range. A
duration is required whenever the fault fires.

--interval is how often the fault starts, such as 10m. It is required whenever
the fault fires: nothing else sets it off.

A value flag left out keeps what the row already has; a new rule starts with
none. 'reset' clears a row.

Examples:
locally chaos apimanagement incident --percentage 25 --seconds 30-120 --interval 10m
  locally chaos apimanagement incident --percentage 100 --seconds 30-120 --interval 10m --location london
  locally chaos apimanagement incident reset --location london
  locally chaos apimanagement incident --percentage 100 --seconds 30-120 --interval 10m --name acct1

Usage

locally chaos apimanagement incident [flags]
  locally chaos apimanagement incident [command]

Flags

-h, --help[=true|false]     help for incident
      --interval string       How often this fault rolls for each resource, e.g. 10m; the first roll lands at a random point within the first interval (required when it fires)
      --location string       Scope this rule to one location, e.g. london
      --millis string         Duration in milliseconds, e.g. 250; N for 0 to N, or MIN-MAX for a range
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --seconds string        Duration in seconds, e.g. 30 or 1.5; N for 0 to N, or MIN-MAX for a range
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos apimanagement incident reset

Remove one incident rule, or put the whole fault back to zero.

Reset the incident fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos apimanagement incident reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos apimanagement latency

Hold requests for a random delay before they are handled.

Hold requests for a random delay before they are handled. The response is
unchanged, just late. With --interval it also stalls live connections: every
interval each is rolled for, and on a hit nothing crosses it in either direction
until the rolled delay has passed. Nothing is dropped; it all arrives late.

Without scope flags this sets the fault's rate on API Management (data plane).
With --location / --name it adds or edits one rule, leaving the rate and other
rules alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

--seconds and --millis set the duration. A bare number is in the flag's unit;
one with its own suffix, such as 250ms or 1.5s, means what it says. The value is
a maximum: each firing picks 0 to N. A duration is required whenever the fault
fires.

--interval adds periodic action on live connections, such as every 30s, to the
fault's per-request behaviour, which carries on as before. For periodic cuts
with no per-request drops, arm disconnect instead.

A value flag left out keeps what the row already has; a new rule starts with
none. 'reset' clears a row.

Examples:
locally chaos apimanagement latency --percentage 25 --seconds 30
  locally chaos apimanagement latency --percentage 25 --seconds 30 --interval 30s
  locally chaos apimanagement latency --percentage 100 --seconds 30 --location london
  locally chaos apimanagement latency reset --location london
  locally chaos apimanagement latency --percentage 100 --seconds 30 --name acct1

Usage

locally chaos apimanagement latency [flags]
  locally chaos apimanagement latency [command]

Flags

-h, --help[=true|false]     help for latency
      --interval string       Also act on live connections this often, e.g. 30s or 10m (adds to the per-request fault; use disconnect for periodic cuts only)
      --location string       Scope this rule to one location, e.g. london
      --millis string         Duration in milliseconds, e.g. 250; the maximum: each firing picks 0 to N
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --seconds string        Duration in seconds, e.g. 30 or 1.5; the maximum: each firing picks 0 to N
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos apimanagement latency reset

Remove one latency rule, or put the whole fault back to zero.

Reset the latency fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos apimanagement latency reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos apimanagement outage

Fail requests for as long as the rule is armed, like a region or service that is down.

Fail requests for as long as the rule is armed, like a region or service that is
down. Each request rolls against the percentage, so at 100 every request fails
until the fault is turned off. Each service answers in its own terms, usually
503 Service Unavailable, and a protocol with live connections also closes the
ones open when the outage starts. For downtime that ends by itself, see
incident.

Without scope flags this sets the fault's rate on API Management (data plane).
With --location / --name it adds or edits one rule, leaving the rate and other
rules alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

--retry-after sets the Retry-After header the fault answers with, such as 5s.
Without one the service's usual hint is sent.

A value flag left out keeps what the row already has; a new rule starts with
none. 'reset' clears a row.

Examples:
locally chaos apimanagement outage --percentage 25
  locally chaos apimanagement outage --percentage 25 --retry-after 5s
  locally chaos apimanagement outage --percentage 100 --location london
  locally chaos apimanagement outage reset --location london
  locally chaos apimanagement outage --percentage 100 --name acct1

Usage

locally chaos apimanagement outage [flags]
  locally chaos apimanagement outage [command]

Flags

-h, --help[=true|false]     help for outage
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --retry-after string    Retry-After this fault answers with, e.g. 5s or 500ms (the service's usual hint when omitted)
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos apimanagement outage reset

Remove one outage rule, or put the whole fault back to zero.

Reset the outage fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos apimanagement outage reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos apimanagement partial-response

Send the status, headers and part of the body, then cut the connection.

Send the status, headers and part of the body, then cut the connection. The
client sees a response that ends early.

Without scope flags this sets the fault's rate on API Management (data plane).
With --location / --name it adds or edits one rule, leaving the rate and other
rules alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

Examples:
locally chaos apimanagement partial-response --percentage 25
  locally chaos apimanagement partial-response --percentage 100 --location london
  locally chaos apimanagement partial-response reset --location london
  locally chaos apimanagement partial-response --percentage 100 --name acct1

Usage

locally chaos apimanagement partial-response [flags]
  locally chaos apimanagement partial-response [command]

Flags

-h, --help[=true|false]     help for partial-response
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos apimanagement partial-response reset

Remove one partial-response rule, or put the whole fault back to zero.

Reset the partial-response fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos apimanagement partial-response reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos apimanagement reset

Zero every API Management (data plane) fault and drop every rule.

Zero every API Management (data plane) fault and drop every rule.

Examples:
locally chaos apimanagement reset

Usage

locally chaos apimanagement reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos apimanagement show

Print the current API Management (data plane) chaos configuration.

Print the current API Management (data plane) chaos configuration.

Examples:
locally chaos apimanagement show

Usage

locally chaos apimanagement show [flags]

Flags

-h, --help[=true|false]     help for show
      --subscription string   Subscription UUID (defaults to the configured default)

locally chaos apimanagement slow-body

Slow the response body down.

Slow the response body down. The status and headers arrive as usual, then the
body is written with a pause before every write.

Without scope flags this sets the fault's rate on API Management (data plane).
With --location / --name it adds or edits one rule, leaving the rate and other
rules alone.

A rule can be lower than the rate: "everywhere except one place" is a rate of
100 plus a rule at 0.

--name acct1 matches that resource in any resource group; --name rg1/acct1
matches only rg1's.

--seconds and --millis set the duration. A bare number is in the flag's unit;
one with its own suffix, such as 250ms or 1.5s, means what it says. One value N
picks 0 to N each time; MIN-MAX, such as 30-120, picks within that range. A
duration is required whenever the fault fires.

A value flag left out keeps what the row already has; a new rule starts with
none. 'reset' clears a row.

Examples:
locally chaos apimanagement slow-body --percentage 25 --millis 100-800
  locally chaos apimanagement slow-body --percentage 100 --millis 100-800 --location london
  locally chaos apimanagement slow-body reset --location london
  locally chaos apimanagement slow-body --percentage 100 --millis 100-800 --name acct1

Usage

locally chaos apimanagement slow-body [flags]
  locally chaos apimanagement slow-body [command]

Flags

-h, --help[=true|false]     help for slow-body
      --location string       Scope this rule to one location, e.g. london
      --millis string         Duration in milliseconds, e.g. 250; N for 0 to N, or MIN-MAX for a range
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --percentage int        How often this fault fires, 0-100 (required)
      --seconds string        Duration in seconds, e.g. 30 or 1.5; N for 0 to N, or MIN-MAX for a range
      --subscription string   Subscription UUID (defaults to the configured default)

Subcommands

locally chaos apimanagement slow-body reset

Remove one slow-body rule, or put the whole fault back to zero.

Reset the slow-body fault.

With a scope flag, removes that rule so those requests use the fault's rate.
Without one, removes every rule and sets the rate to 0.

'reset --location X' removes the rule; '--percentage 0 --location X' keeps a
rule that never fires, which is how to say "everywhere except X".

Usage

locally chaos apimanagement slow-body reset [flags]

Flags

-h, --help[=true|false]     help for reset
      --location string       Scope this rule to one location, e.g. london
      --name string           Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
      --subscription string   Subscription UUID (defaults to the configured default)
Preview

During Public Preview you can use the Team plan for free, and get an early-adopter discount at GA. Sign in

A local cloud for you and your AI agents.

Your Azure infrastructure, running on your machine. Deploy in seconds, break things freely, and ship to Azure when you're ready.