During Public Preview you can use the Team plan for free, and get an early-adopter discount at GA. Sign in
locally chaos postgresql
This page is part of the CLI Reference and is generated from the CLI's own help output, so it matches what locally chaos postgresql --help prints.
For more information see Chaos Engineering.
locally chaos postgresql
Simulate PostgreSQL (data plane) failure modes.
Simulate PostgreSQL (data plane) failure modes. A fault command sets the fault's rate. With a scope flag (--location / --name) it adds or edits a rule instead. Examples: locally chaos postgresql <fault> --percentage N locally chaos postgresql <fault> reset locally chaos postgresql show locally chaos postgresql reset
Usage
locally chaos postgresql [flags] locally chaos postgresql [command]
Flags
-h, --help[=true|false] help for postgresql
Subcommands
- locally chaos postgresql 403 - Answer requests with 403, as when a role assignment has not replicated yet.
- locally chaos postgresql 429 - Answer requests with 429 Too Many Requests and a retry hint.
- locally chaos postgresql 500 - Answer requests with 500 Internal Server Error.
- locally chaos postgresql disconnect - Close live connections cleanly, in the protocol's own terms, so the client has to reconnect.
- locally chaos postgresql drop-connection - Close the connection without answering.
- locally chaos postgresql failover - Fail the primary over on a schedule.
- locally chaos postgresql latency - Hold requests for a random delay before they are handled.
- locally chaos postgresql outage - Fail requests for as long as the rule is armed, like a region or service that is down.
- locally chaos postgresql reset - Zero every PostgreSQL (data plane) fault and drop every rule.
- locally chaos postgresql restart - Restart the workload on a schedule.
- locally chaos postgresql show - Print the current PostgreSQL (data plane) chaos configuration.
- locally chaos postgresql too-many-connections - Refuse new connections with the engine's own connection-limit error.
locally chaos postgresql 403
Answer requests with 403, as when a role assignment has not replicated yet.
Answer requests with 403, as when a role assignment has not replicated yet. On the control plane the error code is AuthorizationFailed; on a database the engine's own equivalent error is sent instead. Without scope flags this sets the fault's rate on PostgreSQL (data plane). With --location / --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --name acct1 matches that resource in any resource group; --name rg1/acct1 matches only rg1's. Examples: locally chaos postgresql 403 --percentage 25 locally chaos postgresql 403 --percentage 100 --location london locally chaos postgresql 403 reset --location london locally chaos postgresql 403 --percentage 100 --name acct1
Usage
locally chaos postgresql 403 [flags] locally chaos postgresql 403 [command]
Flags
-h, --help[=true|false] help for 403
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--percentage int How often this fault fires, 0-100 (required)
--subscription string Subscription UUID (defaults to the configured default)
Subcommands
- locally chaos postgresql 403 reset - Remove one 403 rule, or put the whole fault back to zero.
locally chaos postgresql 403 reset
Remove one 403 rule, or put the whole fault back to zero.
Reset the 403 fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos postgresql 403 reset [flags]
Flags
-h, --help[=true|false] help for reset
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--subscription string Subscription UUID (defaults to the configured default)
locally chaos postgresql 429
Answer requests with 429 Too Many Requests and a retry hint.
Answer requests with 429 Too Many Requests and a retry hint. On a database the engine's own throttling error is sent instead. Without scope flags this sets the fault's rate on PostgreSQL (data plane). With --location / --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --name acct1 matches that resource in any resource group; --name rg1/acct1 matches only rg1's. --retry-after sets the Retry-After header the fault answers with, such as 5s. Without one the service's usual hint is sent. A value flag left out keeps what the row already has; a new rule starts with none. 'reset' clears a row. Examples: locally chaos postgresql 429 --percentage 25 locally chaos postgresql 429 --percentage 25 --retry-after 5s locally chaos postgresql 429 --percentage 100 --location london locally chaos postgresql 429 reset --location london locally chaos postgresql 429 --percentage 100 --name acct1
Usage
locally chaos postgresql 429 [flags] locally chaos postgresql 429 [command]
Flags
-h, --help[=true|false] help for 429
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--percentage int How often this fault fires, 0-100 (required)
--retry-after string Retry-After this fault answers with, e.g. 5s or 500ms (the service's usual hint when omitted)
--subscription string Subscription UUID (defaults to the configured default)
Subcommands
- locally chaos postgresql 429 reset - Remove one 429 rule, or put the whole fault back to zero.
locally chaos postgresql 429 reset
Remove one 429 rule, or put the whole fault back to zero.
Reset the 429 fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos postgresql 429 reset [flags]
Flags
-h, --help[=true|false] help for reset
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--subscription string Subscription UUID (defaults to the configured default)
locally chaos postgresql 500
Answer requests with 500 Internal Server Error.
Answer requests with 500 Internal Server Error. On a database the engine's own equivalent error is sent instead. Without scope flags this sets the fault's rate on PostgreSQL (data plane). With --location / --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --name acct1 matches that resource in any resource group; --name rg1/acct1 matches only rg1's. Examples: locally chaos postgresql 500 --percentage 25 locally chaos postgresql 500 --percentage 100 --location london locally chaos postgresql 500 reset --location london locally chaos postgresql 500 --percentage 100 --name acct1
Usage
locally chaos postgresql 500 [flags] locally chaos postgresql 500 [command]
Flags
-h, --help[=true|false] help for 500
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--percentage int How often this fault fires, 0-100 (required)
--subscription string Subscription UUID (defaults to the configured default)
Subcommands
- locally chaos postgresql 500 reset - Remove one 500 rule, or put the whole fault back to zero.
locally chaos postgresql 500 reset
Remove one 500 rule, or put the whole fault back to zero.
Reset the 500 fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos postgresql 500 reset [flags]
Flags
-h, --help[=true|false] help for reset
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--subscription string Subscription UUID (defaults to the configured default)
locally chaos postgresql disconnect
Close live connections cleanly, in the protocol's own terms, so the client has to reconnect.
Close live connections cleanly, in the protocol's own terms, so the client has to reconnect. Every interval each open connection is rolled for. Compare drop-connection, which cuts them with nothing said. Without scope flags this sets the fault's rate on PostgreSQL (data plane). With --location / --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --name acct1 matches that resource in any resource group; --name rg1/acct1 matches only rg1's. --interval is how often the fault starts, such as 10m. It is required whenever the fault fires: nothing else sets it off. A value flag left out keeps what the row already has; a new rule starts with none. 'reset' clears a row. Examples: locally chaos postgresql disconnect --percentage 25 --interval 10m locally chaos postgresql disconnect --percentage 100 --interval 10m --location london locally chaos postgresql disconnect reset --location london locally chaos postgresql disconnect --percentage 100 --interval 10m --name acct1
Usage
locally chaos postgresql disconnect [flags] locally chaos postgresql disconnect [command]
Flags
-h, --help[=true|false] help for disconnect
--interval string How often this fault rolls for each resource, e.g. 10m; the first roll lands at a random point within the first interval (required when it fires)
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--percentage int How often this fault fires, 0-100 (required)
--subscription string Subscription UUID (defaults to the configured default)
Subcommands
- locally chaos postgresql disconnect reset - Remove one disconnect rule, or put the whole fault back to zero.
locally chaos postgresql disconnect reset
Remove one disconnect rule, or put the whole fault back to zero.
Reset the disconnect fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos postgresql disconnect reset [flags]
Flags
-h, --help[=true|false] help for reset
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--subscription string Subscription UUID (defaults to the configured default)
locally chaos postgresql drop-connection
Close the connection without answering.
Close the connection without answering. The client sees the connection reset, with no status code or error body. With --interval it also cuts live connections: every interval each is rolled for, and on a hit it is reset with nothing said - no close frame or goodbye. For a clean close, use disconnect. Without scope flags this sets the fault's rate on PostgreSQL (data plane). With --location / --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --name acct1 matches that resource in any resource group; --name rg1/acct1 matches only rg1's. --interval adds periodic action on live connections, such as every 30s, to the fault's per-request behaviour, which carries on as before. For periodic cuts with no per-request drops, arm disconnect instead. A value flag left out keeps what the row already has; a new rule starts with none. 'reset' clears a row. Examples: locally chaos postgresql drop-connection --percentage 25 locally chaos postgresql drop-connection --percentage 25 --interval 30s locally chaos postgresql drop-connection --percentage 100 --location london locally chaos postgresql drop-connection reset --location london locally chaos postgresql drop-connection --percentage 100 --name acct1
Usage
locally chaos postgresql drop-connection [flags] locally chaos postgresql drop-connection [command]
Flags
-h, --help[=true|false] help for drop-connection
--interval string Also act on live connections this often, e.g. 30s or 10m (adds to the per-request fault; use disconnect for periodic cuts only)
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--percentage int How often this fault fires, 0-100 (required)
--subscription string Subscription UUID (defaults to the configured default)
Subcommands
- locally chaos postgresql drop-connection reset - Remove one drop-connection rule, or put the whole fault back to zero.
locally chaos postgresql drop-connection reset
Remove one drop-connection rule, or put the whole fault back to zero.
Reset the drop-connection fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos postgresql drop-connection reset [flags]
Flags
-h, --help[=true|false] help for reset
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--subscription string Subscription UUID (defaults to the configured default)
locally chaos postgresql failover
Fail the primary over on a schedule.
Fail the primary over on a schedule. On a hit the primary is unavailable for the rolled duration and any secondary serves reads only, then the primary returns. Without scope flags this sets the fault's rate on PostgreSQL (data plane). With --location / --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --name acct1 matches that resource in any resource group; --name rg1/acct1 matches only rg1's. --seconds and --millis set the duration. A bare number is in the flag's unit; one with its own suffix, such as 250ms or 1.5s, means what it says. One value N picks 0 to N each time; MIN-MAX, such as 30-120, picks within that range. A duration is required whenever the fault fires. --interval is how often the fault starts, such as 10m. It is required whenever the fault fires: nothing else sets it off. A value flag left out keeps what the row already has; a new rule starts with none. 'reset' clears a row. Examples: locally chaos postgresql failover --percentage 25 --seconds 30-120 --interval 10m locally chaos postgresql failover --percentage 100 --seconds 30-120 --interval 10m --location london locally chaos postgresql failover reset --location london locally chaos postgresql failover --percentage 100 --seconds 30-120 --interval 10m --name acct1
Usage
locally chaos postgresql failover [flags] locally chaos postgresql failover [command]
Flags
-h, --help[=true|false] help for failover
--interval string How often this fault rolls for each resource, e.g. 10m; the first roll lands at a random point within the first interval (required when it fires)
--location string Scope this rule to one location, e.g. london
--millis string Duration in milliseconds, e.g. 250; N for 0 to N, or MIN-MAX for a range
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--percentage int How often this fault fires, 0-100 (required)
--seconds string Duration in seconds, e.g. 30 or 1.5; N for 0 to N, or MIN-MAX for a range
--subscription string Subscription UUID (defaults to the configured default)
Subcommands
- locally chaos postgresql failover reset - Remove one failover rule, or put the whole fault back to zero.
locally chaos postgresql failover reset
Remove one failover rule, or put the whole fault back to zero.
Reset the failover fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos postgresql failover reset [flags]
Flags
-h, --help[=true|false] help for reset
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--subscription string Subscription UUID (defaults to the configured default)
locally chaos postgresql latency
Hold requests for a random delay before they are handled.
Hold requests for a random delay before they are handled. The response is unchanged, just late. With --interval it also stalls live connections: every interval each is rolled for, and on a hit nothing crosses it in either direction until the rolled delay has passed. Nothing is dropped; it all arrives late. Without scope flags this sets the fault's rate on PostgreSQL (data plane). With --location / --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --name acct1 matches that resource in any resource group; --name rg1/acct1 matches only rg1's. --seconds and --millis set the duration. A bare number is in the flag's unit; one with its own suffix, such as 250ms or 1.5s, means what it says. The value is a maximum: each firing picks 0 to N. A duration is required whenever the fault fires. --interval adds periodic action on live connections, such as every 30s, to the fault's per-request behaviour, which carries on as before. For periodic cuts with no per-request drops, arm disconnect instead. A value flag left out keeps what the row already has; a new rule starts with none. 'reset' clears a row. Examples: locally chaos postgresql latency --percentage 25 --seconds 30 locally chaos postgresql latency --percentage 25 --seconds 30 --interval 30s locally chaos postgresql latency --percentage 100 --seconds 30 --location london locally chaos postgresql latency reset --location london locally chaos postgresql latency --percentage 100 --seconds 30 --name acct1
Usage
locally chaos postgresql latency [flags] locally chaos postgresql latency [command]
Flags
-h, --help[=true|false] help for latency
--interval string Also act on live connections this often, e.g. 30s or 10m (adds to the per-request fault; use disconnect for periodic cuts only)
--location string Scope this rule to one location, e.g. london
--millis string Duration in milliseconds, e.g. 250; the maximum: each firing picks 0 to N
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--percentage int How often this fault fires, 0-100 (required)
--seconds string Duration in seconds, e.g. 30 or 1.5; the maximum: each firing picks 0 to N
--subscription string Subscription UUID (defaults to the configured default)
Subcommands
- locally chaos postgresql latency reset - Remove one latency rule, or put the whole fault back to zero.
locally chaos postgresql latency reset
Remove one latency rule, or put the whole fault back to zero.
Reset the latency fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos postgresql latency reset [flags]
Flags
-h, --help[=true|false] help for reset
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--subscription string Subscription UUID (defaults to the configured default)
locally chaos postgresql outage
Fail requests for as long as the rule is armed, like a region or service that is down.
Fail requests for as long as the rule is armed, like a region or service that is down. Each request rolls against the percentage, so at 100 every request fails until the fault is turned off. Each service answers in its own terms, usually 503 Service Unavailable, and a protocol with live connections also closes the ones open when the outage starts. For downtime that ends by itself, see incident. Without scope flags this sets the fault's rate on PostgreSQL (data plane). With --location / --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --name acct1 matches that resource in any resource group; --name rg1/acct1 matches only rg1's. --retry-after sets the Retry-After header the fault answers with, such as 5s. Without one the service's usual hint is sent. A value flag left out keeps what the row already has; a new rule starts with none. 'reset' clears a row. Examples: locally chaos postgresql outage --percentage 25 locally chaos postgresql outage --percentage 25 --retry-after 5s locally chaos postgresql outage --percentage 100 --location london locally chaos postgresql outage reset --location london locally chaos postgresql outage --percentage 100 --name acct1
Usage
locally chaos postgresql outage [flags] locally chaos postgresql outage [command]
Flags
-h, --help[=true|false] help for outage
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--percentage int How often this fault fires, 0-100 (required)
--retry-after string Retry-After this fault answers with, e.g. 5s or 500ms (the service's usual hint when omitted)
--subscription string Subscription UUID (defaults to the configured default)
Subcommands
- locally chaos postgresql outage reset - Remove one outage rule, or put the whole fault back to zero.
locally chaos postgresql outage reset
Remove one outage rule, or put the whole fault back to zero.
Reset the outage fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos postgresql outage reset [flags]
Flags
-h, --help[=true|false] help for reset
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--subscription string Subscription UUID (defaults to the configured default)
locally chaos postgresql reset
Zero every PostgreSQL (data plane) fault and drop every rule.
Zero every PostgreSQL (data plane) fault and drop every rule. Examples: locally chaos postgresql reset
Usage
locally chaos postgresql reset [flags]
Flags
-h, --help[=true|false] help for reset
--subscription string Subscription UUID (defaults to the configured default)
locally chaos postgresql restart
Restart the workload on a schedule.
Restart the workload on a schedule. Every interval each target is rolled for; on a hit it restarts the way its own restart action does, dropping its connections. Without scope flags this sets the fault's rate on PostgreSQL (data plane). With --location / --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --name acct1 matches that resource in any resource group; --name rg1/acct1 matches only rg1's. --interval is how often the fault starts, such as 10m. It is required whenever the fault fires: nothing else sets it off. A value flag left out keeps what the row already has; a new rule starts with none. 'reset' clears a row. Examples: locally chaos postgresql restart --percentage 25 --interval 10m locally chaos postgresql restart --percentage 100 --interval 10m --location london locally chaos postgresql restart reset --location london locally chaos postgresql restart --percentage 100 --interval 10m --name acct1
Usage
locally chaos postgresql restart [flags] locally chaos postgresql restart [command]
Flags
-h, --help[=true|false] help for restart
--interval string How often this fault rolls for each resource, e.g. 10m; the first roll lands at a random point within the first interval (required when it fires)
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--percentage int How often this fault fires, 0-100 (required)
--subscription string Subscription UUID (defaults to the configured default)
Subcommands
- locally chaos postgresql restart reset - Remove one restart rule, or put the whole fault back to zero.
locally chaos postgresql restart reset
Remove one restart rule, or put the whole fault back to zero.
Reset the restart fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos postgresql restart reset [flags]
Flags
-h, --help[=true|false] help for reset
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--subscription string Subscription UUID (defaults to the configured default)
locally chaos postgresql show
Print the current PostgreSQL (data plane) chaos configuration.
Print the current PostgreSQL (data plane) chaos configuration. Examples: locally chaos postgresql show
Usage
locally chaos postgresql show [flags]
Flags
-h, --help[=true|false] help for show
--subscription string Subscription UUID (defaults to the configured default)
locally chaos postgresql too-many-connections
Refuse new connections with the engine's own connection-limit error.
Refuse new connections with the engine's own connection-limit error. Without scope flags this sets the fault's rate on PostgreSQL (data plane). With --location / --name it adds or edits one rule, leaving the rate and other rules alone. A rule can be lower than the rate: "everywhere except one place" is a rate of 100 plus a rule at 0. --name acct1 matches that resource in any resource group; --name rg1/acct1 matches only rg1's. --retry-after sets the Retry-After header the fault answers with, such as 5s. Without one the service's usual hint is sent. A value flag left out keeps what the row already has; a new rule starts with none. 'reset' clears a row. Examples: locally chaos postgresql too-many-connections --percentage 25 locally chaos postgresql too-many-connections --percentage 25 --retry-after 5s locally chaos postgresql too-many-connections --percentage 100 --location london locally chaos postgresql too-many-connections reset --location london locally chaos postgresql too-many-connections --percentage 100 --name acct1
Usage
locally chaos postgresql too-many-connections [flags] locally chaos postgresql too-many-connections [command]
Flags
-h, --help[=true|false] help for too-many-connections
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--percentage int How often this fault fires, 0-100 (required)
--retry-after string Retry-After this fault answers with, e.g. 5s or 500ms (the service's usual hint when omitted)
--subscription string Subscription UUID (defaults to the configured default)
Subcommands
- locally chaos postgresql too-many-connections reset - Remove one too-many-connections rule, or put the whole fault back to zero.
locally chaos postgresql too-many-connections reset
Remove one too-many-connections rule, or put the whole fault back to zero.
Reset the too-many-connections fault. With a scope flag, removes that rule so those requests use the fault's rate. Without one, removes every rule and sets the rate to 0. 'reset --location X' removes the rule; '--percentage 0 --location X' keeps a rule that never fires, which is how to say "everywhere except X".
Usage
locally chaos postgresql too-many-connections reset [flags]
Flags
-h, --help[=true|false] help for reset
--location string Scope this rule to one location, e.g. london
--name string Scope this rule to one resource by name, e.g. acct1, or rg1/acct1 for one resource group's
--subscription string Subscription UUID (defaults to the configured default)
During Public Preview you can use the Team plan for free, and get an early-adopter discount at GA. Sign in